Keyword Search: 
Part No. Search: 
OO Scale N Scale G Scale Z Scale HO Scale Slot Cars & R⁄C
  ON THIS SITE  
  SHOPPING BASKET  

Your shopping basket is empty.  To add an item, click the "Buy" button

  YOUR ACCOUNT  
  GAUGEMASTER  
prodigy advance
Gaugemaster Controllers
  RECENTLY VIEWED  
DCDCD-SND.12 - Screw and Nut Driver Set
O Scale Wargaming Architectural Narrow Gauge Tools+
 

DCC Concepts DCD-SND.12 Screw and Nut Driver Set

DCDCD-SND.12
Only £24.95 Out of stock but available to order
Brand: DCC Concepts
Part Number: DCD-SND.12
Our Code: DCDCD-SND.12

Have you ever wondered why some modellers keep using the same tools, year in, year out, while others always seem to need to buy replacements? This usually happens because with ALL tools,there is a “right or wrong” way to use them to make sure they last! The Handles They are made from tough alloys and have been anodised to prevent corrosion. They will rarely ever wear out, but basic care will keep them in perfect condition. Wipe them down after use, especially if you are soldering or using them near strong chemicals. Oil the rotating “Palm Pad” occasionally so that it rotates easily when you are removing and tightening screws. The Tips All of DCCconcepts' Screwdriver and Nut Driver tips are hardened, but excessive force OR using the wrong size tip for the job you are doing can still cause wear or damage them. Choose the correct size tip carefully: This is important because the screws and nuts in today’s models are NOT usually hardened. While the screwdriver tip MAY not be damaged if you do not match the screw and the driver tip you choose, the screw itself will very often be quite badly damaged by any significant mis-matching. Making the Choice Nut Drivers should fit the Nut smoothly with NO slop. Any slop will almost certainly cause Driver or Nut damage. Blade-type tips must NOT be too small and “sloppy” in the screw head. This will chew out the centre of the screw and the under-sized driver tip may also be damaged. Cross-type tips must NOT be significantly smaller than the screw-head. This will damage the screw and may also allow too much leverage, damaging the too-small tip. Cross-type tips must NOT be significantly larger than the screw-head recess. This will badly damage a screw-head quite quickly, making it impossible to remove it.

Related DCC CONCEPTS Product Searches

DCC Concepts

View the full DCC Concepts range

Similar Products By DCC CONCEPTS

DCDCP-CBSS-2 DCC Concepts DCP-CBSS-2
Cobalt SS Surface Mount Point Motor (2 Pack)
DCDCW-32PBT DCC Concepts DCW-32PBT
Twin Decoder Wire Stranded 6m (32g) Purple/Blue
DCLB-2BB-CT DCC Concepts LB-2BB-CT
N Scale Ballast - Brown Blend 5L Club Tub
DCDCD-HZ68.3 DCC Concepts DCD-HZ68.3
ZEN NEM652 8 Pin to 6 Pin NEM651 Socket Harness (3)
  POPULAR BRANDS  
Gaugemaster
Hornby
Atlas
Walthers
Kato
Fleischmann
Noch
Preiser
Piko
Peco
Roco
Bachmann
Graham Farish
Oxford Diecast
Dapol
Viessmann
Faller
Marklin
LGB
Trix
Deluxe Materials
Revell Paints
Humbrol Paints
Train Tech
DCC Concepts
Seuthe
Find Us On Facebook
Follow Gaugemaster on Twitter

We are always looking to make improvements to our website to try and improve the quality of your visit.  We would welcome your feedback and suggestions, so please do not hesitate to e-mail our webmaster with your comments.  Alternatively call us on 01903 884488.

Home  Cookies  Privacy Statement  Terms & Conditions  Site Map  Site Guide
WEEE Regulations  Glossary  Careers & Jobs

Tel –  +44 (0) 1903 884488  Fax –  +44 (0) 1903 884377  E-Mail us –  click here

Gaugemaster.com is a trading name of Gaugemaster Controls Ltd.
Registered in England No. 2714470, Registered office:
Gaugemaster House, Ford Road
Arundel, West Sussex, BN18 0BN, United Kingdom

VAT Reg. No. 587 8089 71

Copyright © 2003-2014 Gaugemaster Controls Ltd. All Rights Reserved.