 |
 All instructions are in PDF format, so you will need Adobe Acrobat to read them. Click on the logo to download it to your computer. |
|
| Transformer Controllers |
|
Our cased Transformer/Controllers are the most popular style of control in our range. Complete with integrated power supply, simply remove the unit from the box, connect it to your track and plug in to the mains and you will be ready to go. In addition, all of these units carry a lifetime guarantee in the rare event of a fault occurring. Simply return the faulty unit to us with a covering letter explaining the nature of the fault. We will then undertake the repair and return the unit to you, free of charge. |
|
|
|
| Twin Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges, with two accessory outputs, this is the most popular unit in our range. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
2 x 12v D.C. at 1 amp each controlled |
| Accessories: |
1 x 16v A.C. at 1 amp uncontrolled
1 x 12v D.C. at 1 amp uncontrolled |
| Measurements: |
148mm x 90mm x 125mm deep |
| Weight: |
1.75Kg |
| Price: |
Only £74.95
|
|
 |
Click here for technical details |
|
|
|
|
| Single Track ‘Economy’ Transformer Controller for ‘N’, ‘OO’ and most small Gauges. This unit has now been superceded by the Combi Unit. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12v D.C. at 0.4 amps controlled |
| Accessories: |
1 x 16v A.C. at 0.4 amps |
| Measurements: |
120mm x 50mm x 125mm deep |
| Weight: |
0.9Kg |
|
|
Click here for technical details |
|
|
|
|
| Single Track Transformer and Controller for ‘N’, ‘OO’ and most small Gauges. An uncomplicated controller which comes complete with a separate, dedicated transformer plugging directly into a wall socket with a 1.8m lead to plug into the controller. |
|
| Transformer: |
 |
| Input: |
Mains (240v A.C.) |
| Output: |
1 x 18v A.C. at 1.1 amp |
| Measurements: |
65mm x 80mm x 83mm |
| Weight: |
500g |
| Controller: |
| Input: |
1 x 18v A.C. at 1.1 amp |
| Output: |
1 x 12v D.C. at 1 amp controlled |
| Accessories: |
1 x 18v A.C. at 1 amp uncontrolled |
The transformer is available separately as model WM1 |
| Measurements: |
64mm x 46mm x 84mm |
| Weight: |
100g |
| Price: |
Only £32.95
|
|
|
Click here for technical details |
|
|
|
|
| Single Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges, with two accessory outputs. This controller is also available for O Gauge as Model 100MO with 2.5 amps controlled output and for G Gauge as Model 10LGB with 20v D.C. controlled output at 2.5 amps (old style case) or Model 10LGB5 with 20v D.C. controlled output at 5 amps. The Handheld Units HH, W and WS are not compatible with these two units. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12v D.C. controlled at 1 amp |
| Accessories: |
1 x 12v D.C. at 1 amp uncontrolled
1 x 16v A.C. at 1 amp
1 x 16v A.C. DIN Socket for Gaugemaster handheld units (HH, W and WS) |
| Measurements: |
148mm x 90mm x 125mm deep |
| Weight: |
1.75kg |
| Price: |
Only £64.95
|
|
|
Click here for technical details |
|
|
|
|
| Single Track Transformer Controller with Simulation for ‘N’, ‘OO’ and most small Gauges. This model is also available for O Gauge as Model PO with 2.5 amp controlled output. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12v DC at 1 amp controlled
(simulator) |
| Accessories: |
1 x 12v D.C. at 1 amp uncontrolled
1 x 16v A.C. at 1 amp |
| Measurements: |
148mm x 90mm x 125mm deep |
| Weight: |
1.75kg |
|
| Price: |
Only £76.95
|
|
Click here for technical details |
|
|
|
|
| Single Track Transformer Controller with Feedback for most small Gauges. Feedback is not recommended for use with coreless design motors and may not be suitable for use with some DCC Ready locomotives. This unit is no longer in production. |
|
| Input: |
Mains (240v A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12v D.C. at 1 amp controlled |
| Accessories: |
1 x 12v D.C. at 1 amp uncontrolled
1 x 16v A.C. at 1 amp |
| Measurements: |
115mm x 90mm x 150mm deep |
| Weight: |
1.5kg |
|
|
Click here for technical details |
|
|
|
|
| Single Track Transformer Controller designed to maximise slow running capabilities for ‘N’, ‘OO’ and most Gauges. Fine speed adjustment on a standard unit is limited by the 300 degree rotation of the control knob from zero to full speed. The Select allows this speed range to be restricted with an attenuator knob so that full rotation of the control knob gives very sensitive speed regulation from zero to, say, walking pace or whatever maximum you require for shunting, backing onto a train or other low speed movements. |
|
| Input: |
Mains (240v A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12/17v D.C. at either 1 amp or 0.3 amp
controlled |
| Accessories: |
1 x 24v A.C. at 1 amp uncontrolled |
| Measurements: |
148mm x 90mm x 115mm |
| Weight: |
1.7kg |
| Price: |
Only £75.95
|
|
|
Click here for technical details |
|
| |
LT LOCO TESTER & CONTROLLER |
|
|
|
| Available in both OO & N gauge versions, this single output controller is ideal for static testing of a loco on integral, adjustable roller sets or moving tests on layout tracks. The loco is set down onto the adjustable roller assemblies, with each wheel engaging into its roller assembly. With the selector switch set to ‘test’ the control knob is used to apply power to the rollers. The ammeter will register the power consumption of the loco. Moving tests under load – gradients, heavy trains etc. – can be made with the selector switch set to ‘track’ whilst the unit is connected to a layout. In this mode the LT can of course be used as a conventional controller with a full 1 amp available at the 12v D.C. controlled output as well as the 16v A.C. output for accessories. |
|
| Input: |
Mains (240v A.C.) use 3 amp fuse
|  |
| Output: |
1 x 12v D.C. at 1 amp controlled |
| Accessories: |
1 x 16v A.C. at 1 amp uncontrolled
Total output rated at 2 amps max |
| Measurements: |
320mm x 80mm x 100mm |
| Weight: |
2kg |
| Price: |
Only £164.95
 |
|
|
Click here for technical details |
|
|
|
|
| Twin Track Transformer Controller with Simulation for ‘N’, ‘OO’, and most small Gauges. The simulator can be switched on or off as required. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
2 x 12v D.C. at 1 amp controlled, both with
simulator |
| Accessories: |
2 x 16v A.C. at 1 amp
2 x 12v D.C. at 1 amp uncontrolled |
| Measurements: |
208mm x 90mm x 147mm deep |
| Weight: |
3.135kg |
| Price: |
Only £134.95
|
|
|
Click here for technical details |
|
|
|
|
| Twin Track Transformer Controller with Feedback for most small Gauges. Feedback is not recommended for use with coreless design motors and may not be suitable for use with some DCC ready locomotives. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
2 x 12v D.C. at 1 amp each controlled |
| Accessories: |
1 x 16v A.C. at 1 amp
1 x 12v D.C. at 1 amp uncontrolled |
| Measurements: |
115mm x 90mm x 150mm deep |
| Weight: |
1.6kg |
| Price: |
Only £79.95
|
|
|
Click here for technical details |
|
|
|
|
| Three Track Transformer Controller with Simulation on one track for ‘N’,‘OO’ and most small Gauges. The simulator can be switched on or off as required. |
|
| Input: |
Mains (240 volts A.C.) use 3 amp fuse |
 |
| Output: |
1 x 12v D.C. at 1 amp controlled, with
simulator
2 x 12v D.C. at 1 amp each controlled |
| Accessories: |
2 x 16v A.C. at 1 amp
2 x 12v D.C. at 1 amp uncontrolled |
| Measurements: |
208mm x 90mm x 147mm deep |
| Weight: |
3.135kg |
| Price: |
Only £134.95
|
|
|
Click here for technical details |
|
|
|
|
| Four Track Transformer Controller for ‘N’, ‘OO’ and most small Gauges. |
|
| Input: |
Mains (240v A.C.) use 3amp fuse |
 |
| Output: |
4 x 12v D.C. at 1 amp each controlled |
| Accessories: |
2 x 16v A.C. at 1 amp
2 x 12v D.C. at 1 amp uncontrolled |
| Measurements: |
208mm x 90mm x 147mm deep |
| Weight: |
3.135kg |
| Price: |
Only £134.95
|
|
|
Click here for technical details |
|
