Keyword Search: 
Part No. Search: 
OO Scale N Scale G Scale Z Scale HO Scale Slot Cars & R⁄C
  ON THIS SITE  
  SHOPPING BASKET  

Your shopping basket is empty.  To add an item, click the "Buy" button

  YOUR ACCOUNT  
  GAUGEMASTER  
prodigy advance
Gaugemaster Controllers
O Scale Wargaming Architectural Narrow Gauge Tools+
Right Lines e-Zine Faller New Items 2016

Introduction to Faller Car System

Matt Lovell

MATT LOVELL looks at this automated vehicle system from Faller.

Everyone loves watching trains operating on a model railway, but sometimes it's good to see a bit more happening on the layout to add realism. One aspect that is often missed is the everyday movement of vehicles on roads.

Faller produced a working roadway system that looks great and is easy to operate, The Faller Car System.

How It Works

Faller Car System

This system uses a metal wire embedded underneath the road as a guide for the battery powered vehicles. This wire is flexible enough to be used on straights, curves and hills.

Faller Car System
Faller Car System

The vehicles are fitted with a motorised chassis and rechargeable battery which pushes the vehicle forwards via a small motor and gear arrangement, following the guide wire. The magnet offset to one side on the chassis is what activates the various additional modules (more on those later).

Faller Car System

The front axle is fitted with a guide stem and magnet that follows the guide wire.

The vehicle then drives around the streets of your railway following the wire through junctions, roundabouts, carriageways and any other arrangement that you can design.

Getting Started

Faller Car System

Faller produces a range of starter sets in both OO/HO Scale (including a House Boat!) and in N Scale with various different vehicles to choose from. These sets include everything you need to get started out with plenty of wire to make quite a large circuit to begin with. They normally include the following items.

  • Vehicle
  • Battery charger
  • 10 metres of special guide wire
  • Roadway knifing filler to cover the wire
  • Roadway paint to paint the road
  • Roadway markings, crash barriers and stakes for decoration
  • Detailed assembly instructions
Faller Car System

Faller also produce lots individual vehicles to add to your road way including Cars, Tractors, Lorries and Buses. These vehicles all use the same power supply to charge the batteries so while a couple of vehicles are running around you could have one on charge ready to go for next time.

Click Here to view available vehicles in OO/HO Scale, and in N Scale.

Other Items Available

In addition to vehicles, Faller has produced lots of accessory modules to create life on the roads. These include Bus Stops, Traffic lights, Stop sections and branch off sections. Most are available in both N and OO/HO Scales.

Faller Car System

The Bus Stop Set allow a bus to pull in off the main roadway, park, wait and pull away again without you having to press any buttons. This level of automation always looks impressive!

Faller Car System

The various Traffic Lights can be installed on the main roadway, and using the stop sections included the vehicle will stop automatically if they are showing red. Once it changes to green the vehicle will start up and drive off again. There is even a Speed Camera Set that flashes as the vehicle drives past.

How to install the wire:

Faller Car System

The metal wire can be installed in one of two ways. The first way is using the special Groove Cutting Tool available from Faller. This tool allows you to cut the perfect depth groove to insert the wire into your baseboard. The wire can be glued down and then using the filler provided in the set you can cover it over to hide the wire from view. It is always best to test the system before covering the wire as you may need to move it.

Faller Car System

If you do not wish to cut a groove in your baseboard, Faller produce a range of laser-cut lengths of roadway under the 'Laser-Street' brand. These fit together like a jigsaw, and already have the groove cut in them for the wire to be inserted. Using the same principle as above you can lay, test and cover the wire to form part of you new roadway. the Laser-Street range us currently only available in OO/HO Scale.

These plates are available as Straights, Curves, Bus stop Sections and even Flexible sections to create your own gentle curves.

Faller Car System

The Junctions and other special plates have the holes already cut in the ready for the branch off sections to be installed.

Scenarios

As with the other parts of your layout, there are always lots of dioramas and little scenes that can be added to enhance it. I have had a few ideas with the Faller Car System which are sure to be talking points.

1. Moving the wire away from the side of the road and strategically placing parked cars will allow you to create a situation where the moving car drives around the parked cars.

2. If you have a country road and an open gate leading to a field, why not take the wire through the gate into the field. Ideal for the Tractor and Trailer vehicle pack.

3. Using the Car System in industrial areas will open up a lot more movement of the scene. Lay the wires through building doorways and between buildings to form a working yard. The wire could be taken around the back of the scene to form the continuous loop.

Faller Car System

You can even use Car System on waterways, with the FA161460 House Boat Set!

These are just a few ideas to get you started but many more are possible with the versatile Car System. Have a look next time you are out for a walk or a drive and see what you can come up with. There will be some interesting new items announced in 2017 in the Car System range, so keep your eyes peeled on RIGHT LINES or on our website.

  POPULAR BRANDS  
Gaugemaster
Hornby
Atlas
Walthers
Kato
Fleischmann
Noch
Preiser
Piko
Peco
Roco
Bachmann
Graham Farish
Oxford Diecast
Dapol
Viessmann
Faller
Marklin
LGB
Trix
Deluxe Materials
Revell Paints
Humbrol Paints
Train Tech
DCC Concepts
Seuthe
Find Us On Facebook
Follow Gaugemaster on Twitter

We are always looking to make improvements to our website to try and improve the quality of your visit.  We would welcome your feedback and suggestions, so please do not hesitate to e-mail our webmaster with your comments.  Alternatively call us on 01903 884488.

Home  Cookies  Privacy Statement  Terms & Conditions  Site Map  Site Guide
WEEE Regulations  Glossary  Careers & Jobs

Tel –  +44 (0) 1903 884488  Fax –  +44 (0) 1903 884377  E-Mail us –  click here

Gaugemaster.com is a trading name of Gaugemaster Controls Ltd.
Registered in England No. 2714470, Registered office:
Gaugemaster House, Ford Road
Arundel, West Sussex, BN18 0BN, United Kingdom

VAT Reg. No. 587 8089 71

Copyright © 2003-2014 Gaugemaster Controls Ltd. All Rights Reserved.